Corrosion-Resistant High Temperature 1J79 Round Bar And Strip
Product Details
1J79 alloy is an iron-nickel soft magnetic alloy. It has the
characteristics of high permeability and low coercivity. It is
widely used in electromagnetic wave shielding and electromagnetic
compatibility with magnetic field characteristics. However, the
magnetic properties of the 1J79 soft magnetic alloy are very
sensitive to stress, and it is impossible to avoid the influence of
stress in practical applications, such as material winding,
extrusion, etc., which will affect the magnetic permeability of the
material. The influence of stress on the magnetic permeability of
materials has been paid more and more attention by people. When a
ferromagnetic material is subjected to mechanical force, strain is
generated in its interior, resulting in stress staring and changes
in the magnetic permeability range. When a ferromagnetic material
is magnetized, if it is restrained from stretching, stress will be
generated inside. Likewise, externally applied forces also generate
stress, which has long been considered an important factor
affecting the magnetic properties of ferromagnetic materials. It is
pointed out in the literature that the influence of stress on
permeability can be eliminated or reduced after the material
undergoes proper processing. However, the previous research mainly
focused on the change of the magnetic permeability of the material
under weak magnetic field. In recent years, the problem of strong
field shielding has been paid more and more attention. There is no
research report on the change of the magnetic permeability of the
1J79 alloy before and after the stress in the strong magnetic
field.
(Common name: Ni79Mo4, Permalloy, 79HM)
Similar to the brand
Chemical composition:
| Brand | % | Ni | Fe | C | Mn | Si | P | S | Cu | Mo |
| 1J79 | Min | 78.5 | - | | 0.6 | 0.3 | | | | 3.8 |
| Max | 80.5 | 0.03 | 1.1 | 0.5 | 0.020 | 0.020 | 0,20 | 4.1 |
Physical properties of 1J79
| The density | 8.6 g/cm3 |
| Curie point | 450℃ |
Mechanical properties of alloys at room temperature
| Brand | Varieties | magnetic |
Initial permeability μO(mH/m) | Maximum permeability μm(mH/m) | Coercive force Hc (A/m) | Saturation magnetic induction intensity Bs(T) |
| 1J79 | cold-rolled belt | ≥31 | ≥250 | ≤1.2 | 0.75 |
Forged (rolled) rod and plate | ≥25 | ≥125 | ≤2.4 | 0.75 |
AC Magnetic Properties of Soft Magnetic Alloys with High Initial
Permeability
| Alloy grade | level | product
type | thickness/mm | Elastic permeability at different frequencies when the peak value
of the magnetic field strength is 0.1A/m µm(mH/m) |
| 60Hz | 400Hz | 1KHz | 10KHz |
| not less than |
| 1J79 | | Cold rolled strip | 0.02 | - | - | 14000(17.5) | 10000(12.5) |
| 0.05 | - | - | 15040(18.8) | 7520 (9.4) |
| 0.10 | - | 18000(22.5) | 12000(15) | - |
| 0.20 | - | 10000(12.5) | 6000(7.5) | - |
| 0.35 | 25 | 7040(8.8) | - | - |
Main chemical composition (%)
| Alloy grade | Mn | Si | Ni | Cr | Mo | Cu | Fe |
| 1J76 | 0.30~0.60 | 0.15~0.30 | 75.0~76.5 | 1.80~2.20 | - | 4.80~5.20 | margin |
| 1J77 | 0.30~0.60 | 0.15~0.30 | 75.5~78.0 | - | 3.90~4.50 | 4.80~6.00 | margin |
| 1J79 | 0.60~1.10 | 0.30~0.50 | 78.5~80.0 | - | 3.80~4.10 | ≤0.20 | margin |
| 1J80 | 0.60~1.10 | 1.10~1.50 | 79.0~81.5 | 2.60~3.00 | - | ≤0.30 | margin |
| 1J85 | 0.30~0.60 | 0.15~0.30 | 79.0~81.0 | - | 4.80~5.20 | ≤0.20 | margin |
| 1J86 | ≤1.00 | ≤0.30 | 80.5~81.5 | - | 5.80~6.20 | - | margin |
Features and applications of 1J79
Transformers, transformers, magnetic amplifiers, choke cores and
magnetic shielding with high initial permeability and operating in
a weak magnetic field.
Product display
Shipping packaging
Production Process
FAQ
1.Are you trading or manufacturer ?
We are company,and we have our own factory
2.How long is your delivery time?
| Quantity(kilograms) | 1 - 500 | >500 |
| Est. Time(days) | 10 | To be negotiated |
3.Do you provide samples ? is it free or extra ?
Yes, we could offer the sample for free charge but do not pay the
cost of freight.
If you have another question, pls feel free to contact us
